What is structural warranty insurance?

Also known as latent defects insurance, structural warranty insurance is a type of policy that covers defects in new buildings for a set period following completion, usually ten or 12 years. Policies are generally purchased by developers before any building work starts, but the point of the cover is to protect the homeowner from structural defects or damage that happens within the protected time period. And because it’s there to benefit the owner of a specific property, it transfers automatically from owner to owner within the ten or 12 year term.

What is a structural defect?

A structural defect is a fault in a new building that could be caused by design failures, poor workmanship, or low-quality materials during the build phase, which may only become apparent several months or even years after the completion date. Structural defects cause physical damage to a property and can include problems with the load-bearing foundations or walls, structural cracks, roof coverings, or other major issues. Fixing structural defects can be highly expensive. With a relatively high number of defects reported, it’s important that property developers, builders, and self-builders take out protection. That’s where a structural defects warranty can help.

Is structural warranty insurance the same as latent defect insurance?

Yes, in essence it is specifically tailored to cover structural damage as a result of an inherent or latent defect for a property.

What does structural warranty insurance cover?

Standard structural warranty insurance protects the structure and weatherproofing of a new build property, including the necessary and reasonable costs of: Rectifying or rebuilding either the whole or part of a building that has been damaged because of defects in design, workmanship, or materials. Making good any defects in the newly built or changed drainage system. Rectifying, repairing, or replacing any defective waterproofing elements of the property caused by failures in design, workmanship, materials, or components. Typically, a policy can also cover an initial two years of defects insurance and building control services. On top of that, structural damage insurance can be extended to cover non-structural aspects of a new build, such as component failure, mechanical and electrical services, and business interruption or loss of deposits should the contractor become insolvent during the build stage. There are a range of structural warranty providers who can supply varying levels of cover depending on your needs – giving both property developers and their buyers peace of mind that if any structural defect occurs, they can claim for the cost of repair.

Who needs structural warranty insurance?

If you are building a new home to sell (whether that is on completion or sometime after) it’s likely you’ll need structural warranty cover as it’s often a requirement from mortgage lenders. Even if you are building your own home, you will still need a structural warranty in case you need to sell the property within ten years of completion, as most mortgage providers require a warranty before they lend on newly built homes. This applies to any type of property you are developing that involves major structural work, including: Commercial and residential buildings New builds and renovations Conversions, extensions, and refurbishments Permitted developments Private rental sector and social housing Student accommodation Retrospective

I have an architects certificate, why do I need a warranty?

Many lenders require a ten year structural warranty policy on new build and renovated projects. Without a warranty, you may be limiting your potential market of buyers. A fairly recent court case highlighted some of the problems associated with reliance on architects certificates. They are an extension of the architects professional indemnity cover and, as such, you will need to be able to prove they were professionally negligent. Additionally, if the architect is no longer in practise or fails to renew their cover, it can often lead to no protection. For more information: https://www.thenbs.com/knowledge/court-of-appeal-provides-clarity-on-architects-certificates

I have finished a project and my previous supplier has been liquidated, can you assist?

We have providers able to cover completed projects, or partially completed projects.

Can you arrange cover for new builds, conversions, refurbishments, and extensions?

Yes, we provide cover on most types of development from single units to mainstream apartment developments, conversions, and change of use, mixed use, commercial, extensions, and renovations.

I have a structural warranty, do I need building insurance?

Yes, we think you should, because they are both very different in what they provide. A buildings insurance policy provides cover in the event of fire, subsidence, lightning, explosion, storm damage etc., but specifically excludes damage caused by faulty or unsuitable materials, design, or poor workmanship. Which is why you should consider purchasing a structural warranty policy as well as buildings insurance.

Does the building control completion certificate provide any cover?

No, it is simply a certificate issued by the building control inspecting party to confirm that the property meets the requirements of the building regulations with regard to health and safety.

Is a home warranty or NHBC warranty the same thing?

Structural warranty insurance is sometimes also known as structural defect, latent defects insurance, building warranty, home warranty, construction insurance, and self build insurance . It’s important to understand what’s being provided and that’s where a broker such as ourselves can help.

Structural & Building Warranty Insurance | Structural Defects Cover

Name: Structural Warranty Insurance
Brand: Alan Boswell Group
Rating: 4.9 (1420 reviews)

Structural Warranty Insurance

Structural warranty insurance is a policy that protects against defects in new buildings for a period of usually 10 or 12 years after completion.

Defects insurance

Structural insurance

Building control services

Deposit protection or contractor insolvency

Structural warranty insurance is a policy that protects against defects in new buildings for a period of usually 10 or 12 years after completion.

While policies are usually purchased by developers before construction begins, it’s actually there to protect the homeowner from structural damage that may occur within the 10 or 12 year period after it has been completed.

The Alan Boswell Group Difference

As independent brokers we are able to access numerous specialist providers, to provide fair and impartial advice on the best provider for you.

Understanding which providers use their own Technical Handbook or that accept works to Building Regulation Standards as being sufficient as well as being able to report on which lenders accept which provider can ensure that you don’t make costly mistakes when arranging cover.

Insurance specialists at Alan Boswell Group

How our customers rate us

First-class service. My requirements were clearly understood and matched to the relevant policy.

Mr Osborne - Commercial Liability Insurance

4.9/5 1420 reviews

Structural warranty insurance in detail

We have the ability to place and arrange cover for a vast array of projects and builds. We have providers able to cover new speculative developments, redevelopments including change of use, and cover for completed projects. We can help with arranging cover for both commercial and residential projects.

Building control services

Combining the surveys for building control and for the structural warranties can reduce demands of your time on site. Some providers are able to provide quotations to amalgamate the building control with the required inspections for the warranties.

Professionals fees

Fees such as architects, surveyors, legal, consulting engineers, and other fees necessarily and reasonably incurred in relation to the complete or partial rebuilding or rectifying work to your home are generally covered.

Contamination cover

Cover can include the cost of remediation expenses incurred in compliance with a Statutory Notice in respect of contamination of the policyholder’s land (if an approved inspector carried out building control).

Defect cover

Includes load bearing foundations, roof coverings, load bearing walls, partitions, floors and staircases, roof framing systems, loadbearing lintels, chimneys and flues.

Non-compliance with building regulations

Cover can include the cost of repairs where there is a danger to the physical health and safety of occupants because the property does not comply with building regulations.

Alternative accommodation

Policies can include cover for alternative accommodation costs and expenses in respect of removal and storage if your home is uninhabitable as a result of the insured defect.

Debris removal cover

Included within the cover provided for the structure.

A-rated providers

We only deal with A-rated providers from reputable insurers with experience in the sector. The recent liquidation of Alpha Insurance A/S, who provided the capacity for one of the UK providers, has demonstrated the need for confidence in your insurers and the 10-12 year policy duration and long tail nature of potential claims only reinforces this.

The key advantages of structural warranty insurance are for the end purchaser as there is no need to establish who’s at fault and for complex litigation in the event there is a structural defect. The policies transfer automatically between owners.

Policy cover includes the cost of complete or partial rebuilding or rectifying work to the property which has been affected by major damage by an insured defect.

Policies are designed to cover the cost of making good any defect in the design, materials, or workmanship in the newly constructed or altered drainage system.

This includes the necessary and reasonable costs of repairing, replacing, or rectifying any part of the waterproof envelope of the property as a result of ingress of water caused by a defect in the design, workmanship, materials or components of the waterproofing elements of the property.

FAQs

Nearly all banks and mortgage providers require a structural warranty as a condition of releasing funds on a new property, so if you want or need to sell the properties that you build, you will definitely need this type of cover.

New home warranties give you peace of mind that if anything does go wrong with the property you’ve constructed, you are covered for the potentially high costs of repair or rebuilding. It gives you comprehensive protection for any mistakes made by inspectors, architects, or contractors, as well as faulty materials or unforeseen issues with the land you’re building on.

A structural warranty will also make your property more attractive for prospective buyers, as it means they won’t have to go through complex litigation or prove fault to claim for a structural defect. The warranty will simply transfer to the next owner if the property is sold again during the cover period.

To make sure you have an appropriate level of protection, check whether your policy includes the following:

Building control services cover. Surveys for building control are combined with structural warranty inspections to save you time and hassle.
Defect cover. Including all major areas, such as load-bearing foundations, roof coverings, load bearing walls, partitions, floors and staircases, roof framing systems, loadbearing lintels, and chimneys and flues.
Debris removal cover and contamination cover for the land where the property is built.
Professional fees. For example to pay for architects, surveyors, lawyers, consulting engineers and any other costs that arise when repairing a structural defect.
Cover for non-compliance with building regulations. Including the cost of repairs where non-compliance poses a health and safety danger to the occupants.
Alternative accommodation in the event the property becomes uninhabitable because of the insured defect.